At-line coupling of UPLC to chip-electrospray-FTICR-MS

Since highly sensitive on-line coupling of UPLC with FTICR-MS is technically infeasible due to their different scan rates, at-line coupling of these techniques was developed for rapid analysis. To enable cutting of one peak of the chromatogram into one fraction, several conditions and relationships were investigated, e.g. the optimum volume of the inserted delay loop, the relationship between retention time, loop outlet drop speed, individual drop volume versus mobile phase composition under constant speed, and linear solvent strength gradient elution modes. Good and reproducible results were achieved applying UPLC as an efficient separation and fast fractionation tool before the FTICR-MS measurements. A chip-based nanoelectrospray ionization system was employed which was perfectly suited to handling the small-volume fractions and was thus chosen for the at-line coupling. The method was initially applied to spiked extracts of cell-free bacterial culture supernatants in which bacterial signalling compounds, namely N-acyl homoserine lactones (AHL), were detected. Good reproducibility and high recovery was observed. Afterwards, a culture supernatant of Erwinia sp. JX3.2, a putative AHL producer, was investigated and N-hexanoyl-homoserine lactone was determined as a possible signalling molecule. More reliable assignments were achieved by use of at-line coupling of UPLC and FTICR-MS compared with off-line measurements. Xiaojing Li and Agnes Fekete have contributed equally to this publication.     

Reactivity of tetracyanoquinodimethane with cobalt(II) chloride and bis(diphylphospino)methane in air

The reactions of CoCl₂·6H₂O, dppm (bis(diphenylphosphino)methane) and TCNQ (7,7,8,8-tetracyanoquinodimethane), with different ratios of the components, provided three new compounds, [Co(dppmdo)₃][TCNQ]₂1 (dppmdo = P,P′-dioxo-bis(diphenylphosphinyl)methane), [Co(dppmdo)₃][(μ-TCNQ)-CoCl₃] 2, and [Co(dppmdo)₃][(μ-DCBE)-CoCl₃] 3 (DCBE = p-dicyanomethyl-benzoic ethyl ester). These products were characterized by IR, UV–Vis and UV–Vis-NIR spectra, X-ray crystallography, magnetic susceptibility measurements and cyclic voltammograms. 1 and 2 reveal low-energy transitions in the near-infrared region, which can be attributed to intra-ligand transitions involving radical anions (TCNQ/TCNQ⁻). It is interesting to note that, except for the redox potentials which are anodically shifted, indicating that it is easier to reduce TCNQ in 1 and 2 than the free TCNQ molecule, the electrochemistry of compounds 1 and 2 resemble that of the independent organic acceptor TCNQ. The magnetic properties suggest that an amount of electron transfer has occurred from the Co^II complex, [Co(dppmdo)₃]²⁺, to the TCNQ⁻ anions in 1; an amount of electron transfer also has occurred from the Co^II cation to the TCNQ⁻ anion via a cyanide-bridge in 2; there is a mixture of spin transition of Co^II ions and antiferromagnetic coupling between Co^II ions in 3.     

Large third-order optical nonlinear effects of gold nanoparticles with unusual fluorescence enhancement

The third-order nonlinear optical properties of two solutions of gold nanoparticles protected by carbazolyldiacetylene derivatives were investigated using the Z-scan technique. Both gold nanoparticle colloid solutions in toluene show unusual fluorescent enhancement and large third-order nonlinear optical properties including nonlinear absorption and refractive effects. When extending the pi-conjugated length of the ligands, the third-order nonlinear properties of composite materials based on gold nanoparticles were enhanced accordingly.     

Simultaneous determination of rifampicin and isoniazid by continuous-flow chemiluminescence with artificial neural network calibration

In this paper a continuous-flow chemiluminescence (CL) system with artificial neural network calibration is proposed for simultaneous determination of rifampicin and isoniazid. This method is based on the different kinetic spectra of the analytes in their CL reaction with alkaline N-bromosuccinimide as oxidant. The CL intensity was measured and recorded every second from 1 to 300 s. The data obtained were processed chemometrically by use of an artificial neural network. The experimental calibration set was 20 sample solutions. The relative standard errors of prediction for both analytes were approximately 5%. The proposed method was successfully applied to the simultaneous determination of rifampicin and isoniazid in a combined pharmaceutical formulation.     

A potential visual fluorescence probe for ultratrace arsenic (III) detection by using glutathione-capped CdTe quantum dots

The interaction between mercaptoacetic acid (MA)-capped CdTe QDs, MA-capped CdTe/ZnS QDs or glutathione (GSH)-capped CdTe QDs with As(III) was studied using fluorescence spectrometry. As (III) has a high-affinity to reduced-GSH to form As(SG)₃, and the emission of the GSH-capped CdTe QDs (λ_em. = 612 nm) is quenched effectively. Thus, a novel fluorescence spectrometric method was developed for As (III) determination by using GSH-CdTe QDs. Under optimal conditions, the quenched fluorescence intensity (F₀/F) increased linearly with the concentration of As (III) ranging from 5.0 × 10⁻⁶ to 25 × 10⁻⁵ mol L⁻¹. The limit of detection (3σ) for As (III) was found to be 2 × 10⁻⁸ mol L⁻¹. This method is potentially useful in visual detection of As (III) under irradiation of the ultraviolet light.     

Separation and Determination of Eremophilenolides from Ligulariopsis shichuana by Capillary Zone Electrophoresis

A new method of capillary zone electrophoresis (CZE) was established by simultaneous assay of four eremophilenolides, 3β-acetoxy-9β-angeloyloxy-1β,10β-epoxy-8α-hydroxyeremophil-7(11)-en-8β (12)-olide (1), 3β-senecioyloxy -1β,10β-epoxy-8α-hydroxyeremophil-7(11)-en-8β (12)-olide (2), 6α-hydroxy-1β,10β-epoxy-8α-hydroxyeremophil-7(11)-en-8β (12)-olide (3) and 3β-acetoxy- 6β-angeloyloxy-1β,10β-epoxy-8α-hydroxyeremophil-7(11)-en-8β (12)-olide (4) in the Chinese herbal extract from Ligulariopsis shichuana. The optimum buffer system was 20 mM borate buffer (pH 10.00). Voltage was 25 kV and detection at 214 nm. Regression equations revealed linear relationships (correlation coefficients 0.9986, 0.9990, 0.9992 and 0.9995) between the peak area of each compound and its concentration. The relative standard deviations of migration times and peak areas were <1.35 and 3.94% within 1 day, respectively. The effects of several CE parameters on the resolution were studied systematically. The contents of four eremophilenolides in Ligulariopsis shichuana were successfully determined with satisfactory repeatability and recovery.     

Separation and determination of nitroaniline isomers by capillary zone electrophoresis with amperometric detection

In this paper, capillary zone electrophoresis with amperometric detection (CZE-AD) was firstly applied to the simultaneous separation and determination of nitroaniline positional isomers. The three analytes could be perfectly analyzed by using the buffer of extreme pH. The effects of several important factors were investigated to find optimum conditions. A carbon-disk electrode was used as working electrode. The optimal conditions were 40 mmol/L tartaric acid-sodium tartrate (pH 1.2) as running buffer, 17 kV as separation voltage and 1.10 V (versus saturated calomel reference electrode, SCE) as detection potential. Under the optimum conditions, o-, m- and p-nitroaniline were separated successfully and good linearity, reproducibility and recovery results were obtained. The detection limit for m-nitroaniline was as low as at 9.06 × 10⁻⁹ mol/L. This proposed method demonstrated long-term stability and reproducibility with relative standard deviations of less than 1.8% for migration time and 1.1% for peak areas. The utility of this method was demonstrated by monitoring dyestuff wastewater and the assay results were satisfactory.     

Preparation and Evaluation of Mono (6A-N-Ethylenediamine-6A-Deoxy)-Functionalized β-Cyclodextrin Bonded Stationary Phases for Normal and Reverse-Phase High-Performance Liquid Chromatography

The preparation, characterization and potential liquid chromatographic applications of two totally and partly functionalized -cyclodextrin-bonded stationary phases were presented. Separation of a series of organophosphorus racemic compounds was achieved under normal and reverse-phase conditions. Separation factor was up to 1.812 and resolution up to 4.072. The influence of chromatographic conditions was investigated and the possible chiral recognition mechanism was proposed.     

气相中Cu+和Zn+与CS2反应的计算研究

以Cu⁺和Zn⁺与CS₂反应作为第一过渡金属离子与CS₂反应的范例体系. 采用密度泛函UB3LYP/6-311+G^*方法计算研究了第一过渡金属离子在基态和激发态与CS₂反应的反应机理. 全参数优化了反应势能面上各驻点的几何构型, 用频率分析方法和内禀反应坐标(IRC)方法对过渡态进行了验证. 并用UCCSD(T)/6-311G^*方法对各驻点作了单点能量校正. 在Cu⁺与CS₂反应中, 计算了单重态初始中间体¹IM1到三重态插入型中间体³IM2的反应交叉势能面. 确定了第一过渡金属离子与CS₂的反应为插入-消去反应, 找到了基态和激发态金属离子与CS₂反应的主要通道.     

“Pinwheel-like” phthalocyanines with four non-peripheral chiral menthol units: Synthesis,spectroscopy, and electrochemistry

Chiral side chains have been incorporated onto the non-periphery moiety of phthalocyanine ring, resulting in a pair of chiral phthalocyanines, (D)-and (L)-1,8,15, 22-tetrakis(2-isopropyl-5-methylcyclohexoxyl)phthalocyanine.